Please wait for the process to complete.
||This resource does not have an owner who is an active HydroShare user. Contact CUAHSI (email@example.com) for information on this resource.|
|Resource type:||Composite Resource|
|Storage:||The size of this resource is 1.4 MB|
|Created:||Oct 26, 2017 at 5:34 p.m.|
|Last updated:|| Oct 26, 2017 at 6:39 p.m.
|Citation:||See how to cite this resource|
|Content types:||Model Instance Content|
|+1 Votes:||Be the first one to this.|
|Comments:||No comments (yet)|
Steady State and Transient models of Juab Valley converted to MODFLOW 2000 models.
<a href="https://pubs.er.usgs.gov/publication/70179114" rel="nofollow">https://pubs.er.usgs.gov/publication/70179114</a>
Plans to import water to Juab Valley, Utah, primarily for irrigation, are part of the Central Utah Project. A better understanding of the hydrology of the valley is needed to help manage the water resources and to develop conjunctive-use plans.
The saturated unconsolidated basin-fill deposits form the ground-water system in Juab Valley. Recharge is by seepage from streams, unconsumed irrigation water, and distribution systems; infiltration of precipitation; and subsurface inflow from consolidated rocks that surround the valley. Discharge is by wells, springs, seeps, evapotranspiration, and subsurface outflow to consolidated rocks. Ground-water pumpage is used to supplement surface water for irrigation in most of the valley and has altered the direction of groundwater flow from that of pre-ground-water development time in areas near and in Nephi and Levan.
Greater-than-average precipitation during 1980-87 corresponds with a rise in water levels measured in most wells in the valley and the highest water level measured in some wells. Less-than average precipitation during 1988-91 corresponds with a decline in water levels measured during 1988-93 in most wells. Geochemical analyses indicate that the sources of dissolved ions in water sampled from the southern part of the valley are the Arapien Shale, evaporite deposits that occur in the unconsolidated basin-fill deposits, and possibly residual sea water that has undergone evaporation in unconsolidated basin-fill deposits in selected areas. Water discharging from a spring at Burriston Ponds is a mixture of about 70 percent ground water from a hypothesized flow path that extends downgradient from where Salt Creek enters Juab Valley and 30 percent from a hypothesized flow path from the base of the southern Wasatch Range.
The ground-water system of Juab Valley was simulated by using the U.S. Geological Survey modular, three-dimensional, finite-difference, ground-water flow model. The numerical model was calibrated to simulate the steady-state conditions of 1949, multi-year transient-state conditions during 1949-92, and seasonal transient-state conditions during 1992-94. Calibration parameters were adjusted until model-computed water levels reasonably matched measured water levels. Parameters important to the calibration process include horizontal hydraulic conductivity, transmissivity, and the spatial distribution and amount of recharge from subsurface inflow and seepage from ephemeral streams to the east side of Juab Valley.
Resource Level Coverage
|MIGRATED_FROM||MODFLOW Instance Resource|
|The content of this resource is derived from||https://pubs.er.usgs.gov/publication/70179114|
People or Organizations that contributed technically, materially, financially, or provided general support for the creation of the resource's content but are not considered authors.
|Paul C. Inkenbrandt||Utah Geological Survey||UT, US||4358812816|
How to Cite
This resource is shared under the Creative Commons Attribution CC BY.http://creativecommons.org/licenses/by/4.0/