GroMoPo Metadata for Oman multilayer 3D model


Authors:
Owners: gromopo_admin
Type: Resource
Storage: The size of this resource is 1.6 KB
Created: Feb 08, 2023 at 4:39 p.m.
Last updated: Feb 08, 2023 at 4:40 p.m.
Citation: See how to cite this resource
Sharing Status: Public
Views: 907
Downloads: 220
+1 Votes: Be the first one to 
 this.
Comments: No comments (yet)

Abstract

Sustainable groundwater aquifers are critical in arid and semiarid countries due to the scarcity of surface water and precipitation. Management of groundwater resources requires estimation of aquifer properties and interaction between multilayers in heterogeneous aquifers. A three-dimensional groundwater flow model was implemented to simulate a complex multilayer aquifer in Oman. Steady-state model was calibrated using groundwater level data in July 2016. Both the automated parameter calibration technique and manual trial and error method were applied for calibrating hydraulic conductivity, groundwater recharge, and anisotropy of soil layers. The optimum set of parameters of 14 observation wells was obtained from the simulation with minimum root mean square error of 0.8 m for groundwater water level. The calibrated model was validated using measured data for October 2016, and root mean square error was found to be 0.81 m for groundwater water level. Among the observation wells which were used in the above analysis, 4 of them were directed to different aquifer depths and each two observation wells were in the same location. These two sets of wells, therefore, were used for analyzing interactions among different aquifer layers. Results showed that increased pumping rates enhanced water transfer between multilayers due to increased hydraulic gradient. The effect was more dominant in layers with high vertical hydraulic conductivity. Also, the sensitivity analysis was performed and results indicated that the predicted water level was less sensitive to vertical anisotropy. The findings of this study could be useful for decision-makers for better management of groundwater resources in arid regions.

Coverage

Spatial

Coordinate System/Geographic Projection:
WGS 84 EPSG:4326
Coordinate Units:
Decimal degrees
Place/Area Name:
Oman
North Latitude
23.7700°
East Longitude
58.4300°
South Latitude
23.1000°
West Longitude
57.7800°
Leaflet Map data © OpenStreetMap contributors

Content

    No files to display.

Additional Metadata

How to Cite

GroMoPo, S. Ruzzante (2023). GroMoPo Metadata for Oman multilayer 3D model, HydroShare, http://www.hydroshare.org/resource/61eae5eca4eb4bb9a2dcbd3f94a9149e

This resource is shared under the Creative Commons Attribution CC BY.

http://creativecommons.org/licenses/by/4.0/
CC-BY

Comments

There are currently no comments

New Comment

required