GroMoPo Metadata for Bremerhaven coastal aquifer model


Authors:
Owners: gromopo_admin
Type: Resource
Storage: The size of this resource is 1.6 KB
Created: Feb 07, 2023 at 6:26 p.m.
Last updated: Feb 07, 2023 at 6:27 p.m.
Citation: See how to cite this resource
Sharing Status: Public
Views: 955
Downloads: 238
+1 Votes: Be the first one to 
 this.
Comments: No comments (yet)

Abstract

Climate change is expected to induce sea level rise in the German Bight, which is part of the North Sea, Germany. Climate change may also modify river discharge of the river Weser flowing into the German Bight, which will alter both pressure and salinity distributions in the river Weser estuary. To study the long-term interaction between sea level rise, discharge variations, a storm surge and coastal aquifer flow dynamics, a 3D seawater intrusion model was designed using the fully coupled surface-subsurface numerical model HydroGeoSphere. The model simulates the coastal aquifer as an integral system considering complexities such as variable-density flow, variably saturated flow, irregular boundary conditions, irregular land surface and anthropogenic structures (e.g., dyke, drainage canals, water gates). The simulated steady-state groundwater flow of the year 2009 is calibrated using PEST. In addition, four climate change scenarios are simulated based on the calibrated model: (i) sea level rise of 1 m, (ii) the salinity of the seaside boundary increases by 4 PSU (Practical Salinity Units), (iii) the salinity of the seaside boundary decreases by 12 PSU, and (iv) a storm surge with partial dyke failure. Under scenarios (i) and (iv), the salinized area expands several kilometers further inland during several years. Natural remediation can take up to 20 years. However, sudden short-term salinity changes in the river Weser estuary do not influence the salinized area in the coastal aquifer. The obtained results are useful for coastal engineering practices and drinking water resource management. (C) 2015 Elsevier B.V. All rights reserved.

Coverage

Spatial

Coordinate System/Geographic Projection:
WGS 84 EPSG:4326
Coordinate Units:
Decimal degrees
Place/Area Name:
Germany
North Latitude
53.7189°
East Longitude
8.7082°
South Latitude
53.5621°
West Longitude
8.4494°
Leaflet Map data © OpenStreetMap contributors

Content

    No files to display.

Additional Metadata

How to Cite

GroMoPo, D. Zamrsky (2023). GroMoPo Metadata for Bremerhaven coastal aquifer model, HydroShare, http://www.hydroshare.org/resource/ce325d445be346d78c08ef9c29171e0d

This resource is shared under the Creative Commons Attribution CC BY.

http://creativecommons.org/licenses/by/4.0/
CC-BY

Comments

There are currently no comments

New Comment

required